If Your Water Heater Suddenly Stops Working: How to Do
If Your Water Heater Suddenly Stops Working: How to Do
Blog Article
Do you find yourself trying to find advice on What Would Cause My Electric Water Heater to Stop Working??
Several contemporary homes use an electric hot water heater for their heater, due to its ease and also ease of use. Nonetheless, much like any other electric appliances, problems may emerge with its use, suddenly. It can be truly frustrating to get up to a chilly shower as opposed to a warm one or having your bathroom with water that isn't warm sufficient or perhaps too hot. Whatever the instance may be, water heater troubles can be rather aggravating. Luckily, we've made a checklist of feasible solutions to your water heater problems. There are a variety of factors that might trigger much of these troubles, maybe a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you switch off the main power supply for safety. Whatever the trouble is, getting it repaired must not posture way too much of an issue if you comply with these steps:
Call A Specialist:
If after replacing all damaged components and resetting your temperature level, the water heater still isn't functioning, you might need to call a specialist plumber for a specialist viewpoint. The trouble with your heater could be that the hot and cold taps have been switched or it might be undersized for the amount of warm water needed in your home. Whatever the situation might be, a specialist plumber would aid address the problem.
Inspect Your Power Supply:
As fundamental as this might seem, it is extremely necessary. Without adequate power, your water heater will certainly not function. So the first thing to do when your water suddenly stops working is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the breaker tripped. If the breaker is the issue, just transform it on and off again. Replace any type of busted or damaged fuse. Evaluate the device with power after these modifications to see if it's currently functioning.
Check Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm enough, you may need to check the temperature setups on your top thermostat. Guarantee the breaker is turned off prior to doing anything. Open the access panel as well as press the red switch for temperature reset over the thermostat. This should assist warm the water. Transform the breaker back on and check if the issue has actually been dealt with.
Examine the Burner in the Water Heater:
If it's not a power issue, then try looking into your heating element if it is still functioning. Examine each of your burner to make sure the issue isn't with any one of them. If any one of them is malfunctioning, change that component and afterwards check whether the hot water is back on.
Conclusion
Hot water heater troubles are not constantly significant. Most of them are because of minor problems like a blown fuse or worn-out heating element. Replacing the damaged components should do the trick. However, if you are still not able to address the issue, give a call to your local plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I am very fascinated with No Hot Water — Water Heater Repair and I hope you enjoyed reading our entry. I beg you take the time to promote this blog entry if you liked it. Thank-you for taking the time to read it.
Drain blockage? Seek our expertise. Report this page